How to safely change a flat tire

changing flat tire

Knowing how to change a flat tire is a requisite skill for all drivers. Normally, flat tires can come about at any place and time, and with no emergency roadside assistance, you may suffer. Nearly 2 in 10 U.S drivers find it difficult to perform this task. Whether you’re a teen or a seasoned driver, it’s time to know how to fix this problem.

If you don’t know how, you’ll be left spending big bucks for the help of a towing company near you.

With the perfect tools and know-how, it’s easier to avoid being stranded along the side of busy roads. As a car expert, I’ve swapped my tires countless times. In this guide, I’ll help you understand the easy steps of changing a tire. If you’re driving in a city street,

Find a safe location or spot

This is the first and important step. Once you’ve noticed you’ve got an expected flat tire, don’t turn or brake suddenly. Instead, reduce the speed of the car slowly. Then, look for a suitable place where you can safely stop to assess the situation. A wider shoulder or a parking lot are two fine options. Level ground is great because it will prevent your car from rolling.

Locate or discover your spare tire

Every car is different; however, locating your spare tire should be easier. Most vehicles have spare tire situated underneath a carpet of a trunk. Also, you’ll discover that some cars mount their spare wheel visibly on the rear hatch. Be proactive by making sure your spare holds air and has good tread before kicking off a road trip.

Loosen the car’s lug nuts

Don’t forget to carry the relevant tools. It’s these tools that will help you to loosen your lug nuts. You’re advised to do this prior to jacking up your car. This is because once the flat wheel is off the ground, then the cranking motion might spin the wheel only rather than loosening the lug nuts. Less tightening the lug guts is usually harder. It’s the most labor-intensive task when it comes to changing the flat tire especially if the mechanic was the last person to install your wheels.

Position your jacking points & jack up the car

First, locate and position your vehicle’s jacking points. Noticeably, every car has different reinforced points under the body for securely and safely supporting a jack whenever you’re jacking up your car. Avoid jacking up in a spot that is not a jacking point. Why? You may experience the jack failing or risk damaging your car. In simple terms, locate the jacking points and get the job done.

Finish unscrewing the lug nuts & replace the tire

Using your wrench or hands unscrew lug nuts completely. Now that your flat wheel is off the ground, now it’s time to replace. Ensure you don’t misplace or lose some lug nuts since you’ll require them to secure the new tire. Now mount your spare wheel on your car. Secure the wheel by screwing on one lug nut while holding it in place. Then, screw on all the lug nuts and use your wrench to tighten them.

Using the jack lower your vehicle slightly & completely

After tightening the lug nuts, slightly lower the vehicle until the spare wheel touches the ground. Be careful to ensure you don’t interfere with your car’s whole weight. Eventually, check the tire pressure and return all the tools and equipment to your vehicle.

At this point, you can now take your flat wheel to a mechanic or a professional auto repair expert and have it replaced or fixed as soon as possible. Now you’ll be ready for travel.

 

Tags: ,

loading
×